install easily. connect securely. manage remotely.
Submitted by geo on Fri, 01/25/2008 - 00:05.
in

The Junxion Box allows users to swap cellular modem cards in order to upgrade to a faster data network or switch data services. Beginning with Junxion Platform firmware v1.4, the Junxion Box can automatically detect and configure most data cards, making swapping even easier.

Before swapping cards, either power down the Junxion Box or make sure that the card is properly disconnected from the Junxion Box.

To swap cards with a basic configuration (firmware v1.4 or later):

  1. Verify in the Device Manager that the Junxion Box PC Card Modem option is set to 'Automatically Detected'.

  2. Unplug the Junxion Box. This will power down the Junxion Box and the card in a safe manner.

  3. Swap cellular modem cards.

  4. Plug in the Junxion Box.

For advanced card swapping (custom configurations or firmware before v1.4):

  1. Open the WAN page of the Junxion Box Device Manager. In the PC Card Modem drop-down box, select 'My Card Not Listed' and click on Apply. This will disconnect the data card from the WAN.

  2. Swap cellular modem cards.

  3. Open the WAN page of the Junxion Box Device Manager. In the PC Card Modem drop-down box, select the new card, enter any additional configuration information, and click on Apply.

The Junxion Box will restart and attempt to connect to the WAN network.